Tuffy Security 295 - Manual

Page 1 of 3 – 7/26/2012 – Rev 7/26/12
INSTALLATION INSTRUCTIONS
JEEP 1987-1995 YJ Hood Lock #295
Call (970) 564-1762 for Technical Support
Please read and fill out the enclosed warranty registration card to activate your warranty.
PARTS CHECKLIST
#1 Hood Lock
TOOLS NEEDED
•
7/16” socket and wrench
•
3/8” socket and wrench
ATTENTION:
•
THIS HOOD LOCK WAS DESIGNED FOR A STOCK OEM VEHICLE, ANY MODIFICATIONS MADE TO
THE GRILLE, RADIATOR, ETC MAY AFFECT THE FIT.
PLEASE READ ALL INSTRUCTIONS THOROUGHLY BEFORE STARTING INSTALLATION.
1. IMPORTANT! Make sure the vehicle is parked on a flat surface, placed in park, and the emergency brake is
activated.
2. Raise the vehicle hood. Remove the (3) #3.3 OEM hood latch bolts. Reaching through the grille, lower the #3.2 OEM
hood latch and temporarily place it at the bottom of the grille. It is not necessary to remove the #3.2 hood latch from
the vehicle. (Figure 1)
FIGURE 1
3. Test various locations for access to install the #1 Hood Lock into the space between the #3.1 grille and the #3.5
radiator. Depending on your vehicle, it may be possible to install the #1 Hood Lock up from the bottom of the vehicle