Tuffy Security 182 - Manual

Page 1 of 2 - 5/15/2009 – Rev122006
INSTALLATION INSTRUCTIONS
Laptop Security Lockbox #182
Please read and fill out the enclosed warranty registration card to activate your warranty.
PARTS CHECKLIST
(4) 5/16 x 11/4” BOLTS (4) 5/16 NYLOCK NUTS (8) 5/16” WASHERS
RUBBER SEAL TUFFY LOCKBOX
TOOLS NEEDED
• Electric
drill
• 3/8” Drill bit
• Marker or pencil
• Knife
• ½” Socket and ratchet
• ½”
Wrench
• Silicone
sealant (Recommended)
PLEASE READ ALL INSTRUCTIONS THOROUGHLY BEFORE STARTING INSTALLATION.
1. Install the rubber seal on the underside of the lid and between the hinge leaves. (See Figure 1) Check the lock operation.
FIGURE 1