Tuffy Security 286 - Manual

Page 1 of 7 – 8/8/2014 – Rev A
INSTALLATION INSTRUCTIONS
JEEP 2007-2010 JK TAILGATE SECURITY ENCLOSURE #286
Call (970) 564-1762 for Technical Support
Please read and fill out the enclosed warranty registration card to activate your warranty.
PARTS CHECKLIST
#1 Lid #2 Front Panel #3 Front Panel Extension
#4 Left Mounting Bracket #5 Right Mounting Bracket
SHIPPING PACKAGE CHECKLIST
#6.1 - (10) 5/16-18 x 3/4”
CARRIAGE BOLTS #6.2 - (10) 5/16”
WASHERS #6.3 - (2) 5/16-18 WING
KNOB NUTS #6.4 - (8) 5/16-18 NYLOCK
NUTS
#6.5 – (1) 49” LONG RUBBER EDGE TRIM
#6.6 – (1) 16” RUBBER EDGE TRIM #6.8 (2) 2-1/2” SMALL BULB RUBBER EDGE TRIM
TOOLS NEEDED
•
18mm socket and wrench (2-door model only)
•
15mm socket and wrench (2 or 4-door models with OEM subwoofer)
•
½” socket and wrench (All applications)
•
Drill with 3/8” drill bit (Required for 4-door model, Optional for 2-door model)
ATTENTION:
•
THIS ENCLOSURE WAS DESIGNED FOR A STOCK OEM VEHICLE, ANY MODIFICATIONS MADE
MAY AFFECT THE FIT INCLUDING: CARPET REMOVAL/CHANGES, SEATS, ETC.