Figure 2b, Figure 3 – Tuffy Security 173 User Manual
Page 4
Page 4 of 8 – 12/20/06 – Rev 11/4/13
Figure 2b
7. Install the #7 trays to both sides #8 and #9 using the illustrated hardware. (See Figure 3)
Figure 3
8. All models with subwoofer only - If the vehicle is equipped with the original factory subwoofer unfasten the OEM
factory front mounting nut attaching it to the floor and also unfasten the top nut attaching it to the base of the roll bar.
(#10.2 Figure 5 shows the location when reinstalling this hardware) Save this hardware you will reuse it.
9. Unfasten the two original screws #10.3 holding the factory rear door alignment guide #10.4 and spacer #10.5 which
are mounted by the Jeep rear door latch. Save this hardware you will reuse it. (Figure 4 shows the location when
reinstalling this hardware)
10. 2-door models only - Remove rear seat in 2-door models.