Twin City BCRFS Belt Driven Centrifugal Filtered Supply Fans - IM-4310 - Manual

©2014 Twin City Fan Companies, Ltd.
Receiving, Inspection & Unpacking
When the equipment is received all items should be carefully checked against the bill of lading to be sure all crates
and cartons have been received. Before accepting delivery, carefully inspect each carton or crate for visible shipping
damage. If any damage is noticed, the carrier should make the proper notation on the delivery receipt acknowledging
the damage. Make notations of all damage on all copies of the bill of lading and have all copies countersigned by
the delivering carrier. The carrier should also fill out a Carrier Inspection Report. The factory Traffic Department should
then be contacted. File claim for damage with the carrier. Physical damage to the unit after acceptance is not the
responsibility of Twin City Fan Companies, Ltd.
Unpack each carton or crate and verify that all required parts and proper quantities of each item have been received.
Refer to drawings for part descriptions. Report shortages or missing items to your local representative to arrange for
replacement parts.
Due to availability of carriers and truck space, it is not possible to guarantee that all items will be shipped together.
Verification of shipments must be limited to only those items on the bill of lading.
The unit nameplate must be checked to make sure the voltage agrees with the power supply available.
FAN ASSEMBLY
The BCRFS supply fan is shipped with the intake hood stored in the fan housing. Remove housing cover. Remove
Intake Hood parts and assemble with hardware provided. Attach Filter Rails to Hood sides. Insert Filters. Install Hood
Top. Attach Hood to inlet side of fan housing.
MOTOR INSTALLATION
Motor 213T frame and larger are shipped loose to avoid damage. Mount to motor plate with hardware provided.
IM-4310
August 2014
BCRFS Belt Driven
Centrifugal Filtered Supply Fans
INSTALLATION, OPERATION & MAINTENANCE MANUAL