Twin City Modular Gravity Hood - MGI with Filters - IM-4720FSL - Manual

©2013 Twin City Fan Companies, Ltd.
See Catalog 4720 for sizes that ship assembled.
Hood End Panel
Assembly (Male Rib)
Side Filter
Hood Mount Bar
Base Assy
Hood Rail Assy
Hood End Panel
Assembly (Female Rib)
Hood Panel
End Filter
Stiffener Angle
Filter Rail, Type -C-
Filter Rail, Type -B-
Filter Rail, Type -A-
Filter Stop Plate
Hood Support Assembly
IM-4720FSL
August 2013
MGI Modular Gravity Hood with Filters
(throat sizes 78" & larger)
INSTALLATION & ASSEMBLY MANUAL
Figure 1.
Qty
Hardware Kit #1C
Item
4 Doubler plates
4 Cap Screw, Serrated Flange, 5/16-18 x 3/4"
4 Hex Nut, Serrated Flange, 5/16-18
Qty
Hardware Kit #1B
Item
40 Cap Screw, Serrated Flange, 1/4-20 x 5/8"
40 Hex Nut, Serrated Flange, 1/4-20
Note: Not always required.
Qty
Hardware Kit #6B
Item
28 Cap Screw, Serrated Flange, 5/16-18 x 3/4"
28 Hex Nut, Serrated Flange, 5/16-18
Qty
Hardware Kit #5
Item
A/R Hood Clips (Only for hood panels longer than 108")
Qty
Hardware Kit #4C
Item
88 Screws, 12 x 3/8"
Qty
Hardware Kit #3
Item
8 Cap Screw, Serrated Flange, 5/16-18
8 Hex Nut, Serrated Flange, 5/16-18
Qty
Hardware Kit #4A
Item
40 Screws, 12 x 3/8"
Qty
Hardware Kit #4B
Item
60 Screws, 12 x 3/8"