Crestron electronic Antenna System SRD-ANT-8-PAK - Manual (Page 7)

Crestron SRD-ANT-8-PAK Antenna System
SRD-ANT-8-PAK Specifications (Continued)
SPECIFICATION DETAILS
Splitter
Gain at 2.335 GHz
Max noise figure
Max input signal
Current
consumption
DC power passing
DC voltage drop (output to input)
8 dB min
3 dB
-10 dBm
1
40 – 100 milliamps
all ports (diode protected)
0.5 VDC typical
Amplifier
Gain
Current
Consumption
Power passing
16 dB (Typical @ 4.5 VDC)
10 milliamps @ 4.5 VDC
Both directions
Environmental Temperature -40° to 150°F (-40° to 66°C)
Humidity 0% to 98% RH
(non-condensing)
Overall Dimensions
Antenna
Height
Width
Depth
Wall
Mount 3
Height
Width
Length
Amplifier
Height
Width
Depth
Coupler
Height
Width
Depth
Splitter
Height
Width
Length
7.75 in (19.69 cm)
7.75 in (19.69 cm)
1.19 in (3.03 cm)
2
5.38 in (13.67 cm)
3.38 in (8.59 cm)
11.63 in (29.54 cm)
0.64 in (1.63 cm)
3.25 in (8.26 cm)
1.07 in (2.72 cm)
0.64 in (1.63 cm)
3.44 in (8.74 cm)
2.10 in (5.34 cm)
0.88 in (2.24 cm)
3.75 in (9.53 cm)
2.83 in (7.19 cm)
Weight 3.8 lbs (1.8 Kg)
1. Specification is achieved with supplied 20 dB attenuator.
2. Depth is measured from the interface connector to the high point of the convex antenna cover.
3. Wall mount dimensions include the antenna mounting bracket.
Installation Guide – DOC. 6724A Antenna System: SRD-ANT-8-PAK • 3