Uncle Milton Torch In My Room - Manual

Batteries are not included.
Requires 2 x 1.5V AA/LR6 batteries. x2
AA/LR6
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE — DO NOT DISCARD
Questions? Visit unclemilton.com
How to install batteries
1. Gently press down on flame and turn counter
clockwise to detach flame from handle.
2. Insert 2 AA/LR6 batteries (not included) as
shown.
3. Reconnect Flame to Handle and turn
clockwise to lock.
Hanging the Torch
The Torch Hanger is
only intended to
mount on a vertical
wall.
Locate stud in wall or
use the wall mounting
hardware included to
mount the Torch
Hanger to the wall as
shown.
2085-0250-1012-V02
To Turn On:
Twist the flame clockwise
Twist the flame counter
clockwise to turn off.
Light-up Explorer’s Torch
TM
TORCH
IN MY ROOM
5+
2085