USL JSD-100 Manual - Manual (Page 62)

Page 62
Band12500=1
Band16000=1
Treble=1
# The bass and teble are a shelving filter that are adjusted prior to
# the individual equalizer bands. That is if the respecit bass/treble
# is enabled for automatic equalization. For each there is a cut off
# frequence and is specified below.
# Bass - Low band range, specified in units of hertz.
# Treble - High band range, specified in units of hertz.
[BassTrebleRange]
Bass=100
Treble=8000
X-Curve 150 Seats.ini
[Curve]
Name=X-Curve150Seats
[Band25Hz]
Value=-3
Max=0
Min=-8
[Band31Hz]
Value=-2
Max=1
Min=-7
[Band40Hz]
Value=-1
Max=2
Min=-6
[Band50Hz]
Value=0
Max=3
Min=-5
[Band63Hz]
Value=0
Max=3
Min=-4
[Band80Hz]
Value=0
Max=3
Min=-3
[Band100Hz]
Value=0
Max=3
Min=-3
[Band125Hz]
Value=0
Max=3
Min=-3
[Band160Hz]
Value=0