USL XTM-300 - Manual (Page 15)

15
7. Specifications
Inputs
Eight inputs via a DB25 (female) corresponding to left, center, right, left surround, right surround, left rear sur-
round, right rear surround, and subwoofer (LFE).
Input impedance is 10k .
Spare channel feeds through unit from high band terminal block to the DB25 connector for use with the CM-8E
monitor.
Outputs
Two DB25M connectors. One connector provides the passed through audio for the surround and
LFE channels. It also provides the low band crossover outputs for the left, center, and right chan-
nels. The second DB25 connector provides the high band crossover outputs for the left, center,
and right channels. This connector also passes through the spare channel to drive the CM-8E
monitor.
Three terminal blocks are wired in parallel with the DB25s to accommodate other equipment.
Controls
Main power switch.
LED indicators illuminate when the main power supply is active.
The backup power LED indicates that the bypass power supply is active, even when the Main Power switch is
off.
Normal/bypass LEDs indicate which circuitry is selected. Both work when the main power supply is active.
Should the main power switch be turned off, the bypass switch must be manually set to bypass.
Power Requirements
100-240VAC, 50-60Hz, 32 Watts
Construction
The XTM is constructed of steel to minimize hum pickup and noise radiation. The overall size of the unit is 1.75"
x 19" x 10.5" (44mm x 483mm x 267mm). The XTM is designed to mount in a standard rack frame or cabi-
net.
Weight: 7 lbs. (3.1 kg)
Shipping weight: 12 lbs. (5.4kg)
Shipping Size: 22” x 22” x 6” (558.8 x 558.8 x 152.4 mm)