USL MMP-10 - Manual (Page 9)

MMP-10 I
NSTRUCTION
M
ANUAL
U
LTRA
★ S
TEREO
L
ABS
, I
NC
.
- 9 -
Mounting the Microphone
Microphone
Clip
Telescoping Stand
Microphone
Telescoping
Stand
Seat Mounting
Microphone mounting:
Mount the microphone to the
telescoping stand as shown
(Figure 2) and place the stands
in the desired locations
(Figure 3) in the theater or
other venue.
Figure 2
Figure 3
Low battery voltage can cause the unit to not switch properly,
and may cause measurement errors. To avoid this, the MMP-10
incorporates a low battery sensing circuit. When the battery
voltage drops too low, the unit will reset to microphone one, and
the red LED will blink. Replace the battery with a standard 9V
alkaline battery.
Low Battery Indicator