USL XTD-680 - Manual (Page 8)

- 8 -
In the “Speaker Library” window, use the pulldown to select the speakers.
You may load channels by checking the boxes in the library window.
When you have selected the channels you want, click “OK” to close the “Speaker
Library” window. At this time, the settings you selected are loaded into the XTD-
680 and will be reflected in the display and the data at the bottom of the display.
You may un-mute the system and audio should be present.
This would be a good time to do a Disconnect and select “Save”.
After doing a Disconnect/Save, the CM Series should be power cycled. When the
unit comes back on, it should be ready for use with the speaker crossover settings
you saved.