VACUUBRAND VacuuHandControl VHCpro - Manual (Page 24)

page 24 of 36
Set the VHC pro to continuous aspiration to avoid
a possible agglutination of the aspiration hose.
To avoid a permanent load on the vacuum sup-
ply, we recommend to switch off vacuum supply
or to close connection to the vacuum supply.
Store the device in dry conditions.
➨
Attention: When removing the aspiration
controller VHC pro liquid in the tube may leak
especially when using systems without cou-
plings!
At the end of aspiration, continue to aspirate
until there is no more liquid in the aspiration
tubing and purge with cleaning or disinfec-
tant agent if necessary.
Adopt suitable measures to prevent the re-
lease of dangerous, toxic, explosive, corro-
sive, noxious or polluting fluids, vapors and
gases. In such cases, use an appropriate
collecting and disposal system and take pro-
tective action for personnel, equipment and
environment.
Shutdown
At the end of aspiration, continue to aspirate until there is no more liquid
in the aspiration tubing and purge with cleaning or disinfectant agent if
necessary.
NOTICE