VACUUBRAND MZ 2D User Manual
Page 14
page 14 of 24
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 995652 / 08/10/2009
Vacuum adjustment device (inlet) ........................... 696840
Pressure adjustment device (outlet) ......................... 696841
Installation vacuum and / or pressure adjustment device at
ME 2 / MZ 2
Assemble control valve first, then align and fasten gauge.
Installation vacuum adjustment device at ME 4
(omit extra parts)
Installation pressure adjustment device at ME 4
(use extra seal rings of the pressure adjustment device)
Additional parts are necessary:
Swivelling screw-in fitting ............................................ 638548
Ring type nipple .......................................................... 638197
Hose (PE), 185 mm ..................................................... 639861
Ring nut .................................................................... 3120348