VACUUBRAND ME 8S - Manual (Page 17)

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. Manual-no.: 999021 / 07/05/2008
page 13 of 22
Assemble control valve first, then align and fasten gauge.
ME 8
Vacuum adjustment device (inlet) ........................... 696840
An additional part is necesssary:
Hollow bolt .................................................................. 639757
MZ 4
Vacuum adjustment device (inlet) ........................... 696840
MD 4
Vacuum adjustment device (inlet) ........................... 696840
MV 2
Vacuum adjustment device (inlet) ........................... 696840