Veracity CAMSWITCH 4 PLUS - Manual (Page 2)

WALL MOUNT CLIPS
• To mount the unit securely to a flat surface, fit the enclosed
clips as shown and refer to the drilling template below.
DIMENSIONS | MOUNTING HOLE TEMPLATE
• Width 110mm (131mm inc. clips) | Depth 70mm (76mm inc. connectors) | Height 22mm | Weight 135g
Scale 1:1
DIN RAIL CLIP (Option)
• Remove the two rear screws and fit as shown.
POE POWER AVAILABILITY
• CAMSWITCH 4 Plus can deliver up to full 802.3at POE Plus
power on all 4 ports, however the total budget is limited by the
power supply connected.
• The power budget is the total power used by POE devices.
This information may be found in the IP camera or POE device
datasheets. POE power classes are ignored.
• For example, the VPSU-57V-1500 provides a 78W budget.
This is enough for two full-power 802.3at (25.5 watt) cameras
plus two full power 802.3af (13 watt) cameras, or four
cameras of up to 19 watts each.
INPUT SOURCE BUDGET
DC
VPSU - 57V - 800 40 watts
VPSU - 57V - 1500 78 watts
POE
POE switch 10 watts
VOR - OSP 25 watts
1. Insert 2. Click
• To check the power budget for your supply, refer to the table
below. Only Veracity 57V power supplies may be connected
to DC inputs.
131mm
110mm
122mm
69.2mm 64.2mm
25mm
8 5