Rocco – Verity Audio Rocco - Packing / Unpacking Instructions User Manual

Page 2

Advertising
background image

1005 Saint-Jean-Baptiste, Suite 150
Quebec, QC G2E 5L1 Canada

www.verityaudio.com

[email protected]

Tel: (418) 682-9940
Fax: (418) 682-8644

2004.06.30

ROCCO

P r o d u c t P a c k i n g I n s t r u c t i o n s

The complete packaging should include:

i.

(1) ATA approved flight case;

ii. (2) Accessory boxes;
iii. (1) Package containing the owner's manual.

One accessory box contains :

i.

(4) Threaded spikes;

ii. (4) Threaded spikes locking nuts.

The other accessory box contains :

i.

(9) Sorbothane

bumpers.

WARNING: The Rocco’s module and its packaging are big and
heavy. Any operations that ask for moving, lifting or tilting will
require the assistance of a second person. Attempting to do it
alone could be hazardous, create injuries or permanent
damage to the loudspeaker.

1. Turn off all audio and video equipment. Remove the

power cord and all the interconnects signal input cable
from the Rocco active subwoofer input. The power cord
can be stored inside the port;

2. Temporarily remove the subwoofer grilles;

3. Remove the glass and place it at the bottom of the flight

case;

4. Remove the nine (9) sorbothane bumpers and store them

in one accessory box;

5. Turn the subwoofer over on one speaker side. You should

do it on a soft surface (a clean carpet or a big cotton
cloth);

6. Remove the four (4) spike locking nuts and the four (4)

threaded spikes. Store them inside the other accessory
box;

7. Place the subwoofer back on its upright position;

8. Place the hands under the central section of the cabinet.

Lift the section and carefully lay it on the base of the flight
case;

9. Reinstall the two (2) speaker grilles;

10. Store the accessory boxes and the owner's manual inside

the provided space;

11. Carefully install the upper shell of the flight case by

matching the two black pop rivets;

12. Secure the cover in place by closing the four (4) latches.

Locking the latches with tie wraps is highly
recommended
;

13. The Rocco active subwoofer is ready to be labeled and

shipped.

Advertising