Vexilar Flasher Family 2013 - Manual (Page 16)

16
Auto Zoom
( FL-18, FL-20, & FLX-28 Only )
Auto Zoom (AZ) puts the flasher into a split-screen view, with the complete water column on
the right and a magnified view from the bottom on the left. When you switch to Auto Zoom
Mode, the flasher automatically selects the magnified bottom view for you. However, you
do need to have the flasher set to a depth range in which the bottom is in view.
FL-18
Activate Auto Zoom by switching the
Mode control to the AZ selection on the
right or the left. The right selection operates
Auto Zoom at the normal power level. The
left selection operates Auto Zoom in Low
Power Mode. FL-20
Activate the Auto Zoom by switching the
Mode control to either the AZ 6’ or AZ
12’ setting to the right, or the AZ 6’ or AZ
12’ setting to the left. The right (Yellow)
settings operate with the display at full
brightness.
FLX-28 Auto Zoom
Activate the Auto Zoom by switching the Mode
control to the right for either the normal powered
AZ (6’) or AZ x2 (12’) setting. Please note that
the Auto Zoom feature will not function when
the range control is set to the 10 foot setting.