Cobra Electronics XRS 9950 - Manual (Page 6)

7
6 English
Getting Started
Nothing Comes Close to a Cobra ®
To Turn On the Unit and Adjust the Audio Volume
Unit will cycle through
Power On / Self Test.
Alert Settings will scroll.
Check marks indicate
which are set. (Factory
defaults are shown when
the unit is new.)
Shows only when the
Optional GPSL is
installed. See page 33
for more information.
Standby screen will show
City or Highway and Car
Battery Voltage icons.
Compass and IntelliMute
will also show if turned
On and set in the User
Settings Menu.
Visual Display
None None
Testing, then
three beeps Testing, then
three beeps
None None
None System Ready
Power On/Off And Audio Volume
•
Controls
•
While working with this manual, page A2 can be folded out for reference
to the controls on the detector unit. There are no controls on the
Optional GPSL unit.
Your Detector
Getting Started
Your Detector
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the ignition is
Off. If this is the case with your vehicle and you have turned the SmartPower Off,
you should turn Off or unplug your detector when parking for lengthy periods. Cobra
recommends leaving SmartPower at the factory setting, which is On. SmartPower is
described on page 21.
Standby Screen Icons
•
NOTE
For example, the sample screen above indicates that IntelliMute is active,
the Compass is calibrated, your system is set to City mode and your
vehicle's battery voltage is 13.6.
City Mode Highway Mode
Compass
(Southeast) Car Battery
Voltage
IntelliMute Above
Activation Point IntelliMute Below
Activation Point User and Alert
Settings Menu Sample Screen
(See note)
Tone Tone