Wells Sinkware CMU2318-9-16 - Manual

19
Installation Guide
Wentworth Undermount Stainless Steel Sinks
Important Information
WARNING: Risk of personal injury. Sink edges are sharp and can cause
serious injuries. Use gloves and handle sink edges with caution.
NOTE:
Due to the nature of undermount installation, Wentworth recommends that your
undermount sinks be installed by professional installers.
The templates are only a guide. Wentworth strongly recommends the physical
presence of the sink when countertop is cut.
For replacement installations, make sure the existing cutout is the same size or
smaller than the cutout for the new sink.
The number of mounting clips included with your sinks may vary. Use all the
clips provided with the sink.
Allow the silicone caulk to cure following the manufacturer's instructions. All
information in this manual is based on the latest product information available at
the time of publication. Wentworth Company reserves the right to make
revisions in the design of products without notice.
1. Wentworth undermount sinks can be installed in three different ways in terms of
the amount of reveal of the sink flange from the countertop cutout opening (see
Undermount Reveal Options at Page 24).
All templates for Craftsmen Series undermount stainless steel sinks are 2-in-1 for
both 1/ 4 positive reveal and flush mount installations. If you want the sink
installed differently from what the template offers, make sure to tell your fabricator
your preference.
''
INSTALLATION GUIDE