Wiko CINK PEAX 2 - Manual (Page 34)

~ Charging the Battery
Your phone is powered by a rechargeable battery. You are advised to
charge the battery fully as soon as possible. A flashing red light indi-
cates that the battery level is low: if the charge level is too low, it may
shorten the life of the battery.
Connect the charger to a power outlet and the micro UsB connector
to the phone’s UsB port.
The phone’s status indicator changes to red, indicating that the device
is charging.
Once the phone has finished charging, the status indicator changes to
green and you should unplug the charger.
~ Installing the Memory Card
Your phone takes a micro sD memory card of up to 32 GB.
To install a memory card, turn the phone off and remove the back cover.
Now insert the memory card in the slot.