Wiko LUBI 3 - Manual (Page 12)

16. Due to the used enclosure material, the GSM mobile
phone shall only be connected to a USB Interface of ver-
sion 2.0 or higher. The connection to so called power USB
is prohibited.
17. The power adapter is the disconnect device for this
equipment. The socket-outlet shall be near the equipment
and easily accessible.
18. This charger is for indoor use only, the charger type is :
~ Important operating guidelines
Batteries - SIM - Emergency calls - SAR - Repairs
1. To increase the life of your battery, only use WIKO charg-
ers and batteries. Replacing the battery with a non-compli-
ant model may result in the latter exploding.
2. Never throw batteries on a fire and follow the guidelines in
force for recycling used batteries and phones.
3. Be careful not to crush or damage the battery, as this
could cause an internal short circuit and overheating.
4. Do not take the battery apart.
5. The battery can be recharged several hundred times be-
fore needing to be replaced. When it shows signs of losing
its power, it can be replaced.
6. If you do not use your mobile phone for an extended
period, remember to recharge the battery to optimise its
use time.
7. Do not throw batteries away with household waste: recy-
cle them in accordance with the manufacturer’s guidelines.
If the battery is damaged, contact the after-sales service or
the nearest authorised WIKO dealer.
8. Unplug the charger from the wall socket when the battery
is fully charged in order to reduce your energy consumption.
AREA COUNTRIES CHARGER TYPE
Area 1
France, Germany, Italy,
Portugal, Spain, Belgium,
Netherland, Switzerland,
Luxembourg, Poland,
Algeria
TN-050070E2, output
voltage/current is
5.0V/0.7A.
Area 2
UAE, Saudi Arabia,
Nigeria, Kenya
UD56A50100, output
voltage/current is
5.0V/1.0A