Wilkerson L26 User Manual
Page 2
ADJUSTING
SCREW
O-RING
FORCE-FILL
ADAPTER
(Optional)
FILL PLUG KIT
(Standard)
SIGHT DOME
KIT
BODY
NNR
SIPHON TUBE
ASSEMBLY
ADAPTER
O-RING
BALL
O-RING
TAMPER-RESISTANT
CAP (Optional)
O-RING
PETCOCK
(for metal
bowls only)
METAL BOWL
NUT
RETAINING SCREW
NNR
PLASTIC
PETCOCK KNOB
(Optional with plastic bowl)
O-RING
BOWL
INSERT
PLASTIC BOWL
METAL BOWL
GUARD
Flow-Guide
®
VARIABLE ORIFICE
(3/8" Models)
Flow-Guide
®
VARIABLE ORIFICE
(1/4" Models)
Flow-Guide
®
VARIABLE ORIFICE
(1/2" Models)
RETAINER
SCREW
SCREW
SPACER
83-179-000
NNR=NOT NORMALLY REPLACED
ASSEMBLIES
FOR AUTO-FILL™ LUBRICATOR ORDER
ADAPTER ASSEMBLY NO. LRP-95-965
SHOWING PROPER INSTALLATION OF
SIPHON TUBE METAL BRACKET TO ALLOW
FREE TRAVEL OF FLOAT
Insert top of siphon tube
onto barb fitting in
METAL BRACKET
Install on tube (as
shown left) as near
as possible to barb.
Float should be able to
freely move up and down
after tube and bracket
are in place.
TRANSPARENT
PLASTIC BOWL
(shown without
bowl guard)
FLOAT
ASSEMBLY
OIL INLET
FITTING
Kit includes Float Assembly, Insert, O-ring, Stem Assembly,
Siphon Tube, Transparent Plastic Bowl, and Bowl Guard.
NOTE:
DO NOT ATTEMPT TO REPAIR THE AUTO-FILL ASSEMBLY
MECHANISM IN THE FIELD: IF IT MALFUNCTIONS,
PURCHASE A NEW ASSEMBLY.