Winco 4-Wheel Dolly Kit Assembly Instructions For 6kW Gen-Sets - Manual (Page 4)

4 12111-00 16199-009I
STEP 4
Winco Inc.
Service Dept.
507-357-6831
Remove and discard axle protectors (ref. 5). Tap one hubcap (ref.10) onto axle
(ref. 2) using a rubber mallet. Slide washer (ref. 11), wheel (ref. 1), washer (ref.
11) and axle stub (ref. 6) onto axle (ref. 2). Then slide one assembly through axle
bracket (ref. 3). Place other spacer, washer, wheel and washer on axle. Repeat
for other axle bracket.
Remove the blocks from under the cradle.
Tap the last two hubcaps (ref. 10) on the axles. NOTE: Do not tap too hard as
you may dent the hubcaps.
Cradle depicted may not match your model. •
•
•
•