Winco HPS6000HE/I - Manual (Page 16)

3180-10
16
60706-238
TROUBLESHOOTING
PROBLEM (SYMPTOMS) POSSIBLE
CAUSES
———————————————————————
Won’t Start
*Low Oil Level.
*Fouled spark plug.
*Out of fuel.
*Start switch in Off position.
*Fuel valve turn off.
*Plugged fuel fi lter.
*Blown fuse in key switch
———————————————————————
Voltage too low
*Engine speed is too low.
*Generator overloaded.
*Defective stator.
*Defective rotor (fi eld).
*Defective Capacitor.
———————————————————————
Circuit Breaker
*Defective load.
Trips *Defective receptacle.
*Excessive Load.
———————————————————————
Voltage too high
*Engine speed is too high.
———————————————————————
Generator
*Overloaded.
overheating *Insuffi cient ventilation.
———————————————————————
No output voltage
*Short in load (disconnect).
*Tripped or defective circuit
breaker.
*Broken or loose wire.
*Defective receptacle.
*No residual magnetism
(in generator).
*Defective stator.
*Defective rotor (fi eld).
*Shorted capacitor.
*Shorted diodes on rotor.
*GFCI Receptacle tripped.
———————————————————————
SPECIFICATIONS
SPECIFICATIONS
HPS6000HE/I
Generator manufacturer MECC ALTE
Model # S16W-130/A
Part number 16346-006
Rotor resistance 3.95 Ohms
Stator resistance G1-N 0.36 Ohms
Stator resistance G3-N 0.36 Ohms
Cap winding resistance 2.45 Ohms
Capacitors 25.0 mF
Capacitor part number 16346-612
Engine manufacturer HONDA
Engine model number GX340
ELECTRIC RT2VW2E
Spark plugs BPR6ES (NGK)
Air fi lter 17211-899-000
Spark plug gap 0.030 in
Oil capacity 1.2 Qts.