Crown Equipment Cushion Tire Lift Trucks MAX50 - Manual (Page 4)

MAX50 TRUCK DATA AND FEATURES
ENGINE
K21 (2.1 liter) gasoline/LPG, 4-cylinder,
in-line engines with Engine Concentrated
Control Systems (ECCS) exceed EPA emissions
standards. These low-RPM, high-torque in-
dustrial engines offer reduced maintenance
requirements, exceptional emissions controls,
fast acceleration, high performance, reliable
durability and enhanced serviceability.
• There are three engine fuel choices:
gasoline multi-port fuel injection, LPG
single-port (throttle body) fuel injection,
or a dual-fuel system with easy switching
at the fl ip of a switch. All engines are
equipped with 3-way catalytic converters
and closed-loop exhaust systems.
• All engines utilize an ECCS that continu-
ously monitors data from the fuel pressure,
accelerator throttle position, mass air-fl ow
sensor, and heated oxygen sensor – for
improved fuel economy, smooth operation,
reliable starting in cold weather, and high
performance throughout the operating
range. An electronic throttle governor pro-
tects the engine against over-rev damage.
• Crankshaft and camshaft position sensors
provide information to the ECCS for optimum
ignition and fuel injection timing. Each cylinder
has an individual ignition coil for precise
control and reliability.
• An engine coolant temperature sensor
and controller protects the engine against
damage due to high engine temperature
by automatically limiting engine speed
during high-temperature operation. If the
engine coolant temperature exceeds safe
operation temperature, the engine will be
shut down. An illuminated indicator on the
instrument console indicates high-temper-
ature operation, and gives the operator
warning of engine shutdown.
• The aluminum alloy cylinder head has large
intake and exhaust valves and a semi-hemi-
spherical combustion chamber for effi cient
fuel consumption.
• The engine block is designed with fi ve main
bearings. All main and rod bearings are
micro-grooved to improve lubrication and
reduce wear.
Maximum Fork Mast Height Mast Height Free Lift
Height in. (mm) Lowered in. (mm) Extended in. (mm) in. (mm)
2-STAGE FREE VIEW (FV)
82 (2,080) 60.5 (1,535) 130 (3,300) 5.5 (140)
106 (2,690) 72.5 (1,840) 154 (3,910) 5.5 (140)
116 (2,945) 77.5 (1,970) 164 (4,165) 5.5 (140)
128 (3,250) 83.5 (2,120) 176 (4,470) 5.5 (140)
146 (3,705) 92.5 (2,350) 194 (4,925) 5.5 (140)
3-STAGE FULL FREE VIEW (TFV)
158.5 (4,025) 73.5 (1,865) 206.5 (5,245) 25.5 (645)
170.5 (4,330) 77.5 (1,965) 218.5 (5,550) 29.5 (750)
188.5 (4,785) 83.5 (2,120) 236.5 (6,010) 35.5 (900)
198.5 (5,040) 87.5 (2,225) 246.5 (6,260) 39.5 (1,000)
216.5 (5,500) 95.5 (2,425) 264.5 (6,720) 47.5 (1,205)
235.5 (5,980) 104.5 (2,655) 283.5 (7,200) 56.5 (1,4355)
NOTE: Custom masts available. Please consult your authorized dealer for information.
SPECIAL FEATURES
• EPA Tier II compliant K21 industrial engine
with high torque at low RPMs for power
and fuel effi ciency
• Dual fl oating structure uses drive-train
cushion mounts and suspension compart-
ment mounts to isolate the operator from
engine and fl oor vibration
• New full fl oating transmission with high-
capacity oil cooler for the torque converter,
aluminum alloy transmission case for better
heat dissipation, and highly reliable, dust-
resistant, double-sealed universal
joint design
• Self-adjusting brakes with thicker drums
improves heat resistance in severe duty
applications
• Steer axle with integral double-acting,
double-ended cylinder, high-capacity king-
pin needle bearings, and heavy-duty seals
• Mast with large visibility window, combined
with low profi le dash display, offers the
operator an unrestricted view to the fork
tips and surrounding area
• Operator presence system locks out lift,
lower, tilt and travel functions when the
operator leaves the seat for longer than
three seconds
STANDARD EQUIPMENT
• New low profi le dash display –
Fuel Gauge,Water Temperature Gauge
and Hour Meter
• Indicator lights – Neutral/Return to
Neutral, Low Oil Pressure, Low Battery/
Alternator, Hydraulic Lock (Operator
Presence), Check
Engine Warning, Maintenance Error Code
• Drawbar Pin in Counterweight
• Electronic Ignition, Anti-Restart
Ignition Switch
• Fully Hydrostatic Power Steering
• Long-Life Headlights (OHG Mounted)
• LED Tail/Stop/Rear Turn Lights
• High-Mount Air Intake
• Horn with Actuator on Center of
Steering Wheel
• Three-Piece Overhead Guard
• Comfortable Seat and Operator Restraint
System with Lap Belt
• Three-Function Hydraulic Control Valve
• Parking Brake with Double-Action Release
• Tilting Steering Column
• Large, Open Floor Space with Operator
Compartment Suspended-Mount Pedals
• Transmission Torque Converter Oil Cooler
• Load Backrest
• Spacious Step Area, Large Entry Handgrip
and Wide-Open Floor Space allows easy
entry/exit
• Engine Protection System
• ITA Class II Fork Carriage
• ITA Class II Forks
• Critical Wiring Harness Connectors are
Waterproof
• Contoured, Easy-to-Grip, Hydraulic Control
Lever Knobs
OPTIONAL EQUIPMENT
• Warning Lights & Audible Travel Alarms
• Economy Mode Package
• Tilt Cylinder Boots
• Cotton-Core Radiator
• Spinner Knob Steering Wheel
• Dual-Fuel System
• Optional Fork Lengths
• Sideshifter – Hang-On or Integral
• 4-Way Valve and Internal Hosing
• Special Tires
• Full Suspension Seat
• Fire Extinguisher
• Attachments
• Rear-view mirrors
TECHNICAL DATA