Wingscapes Wildlife Cam - Manual (Page 7)

Page 7
WildlifeCam User Guide
SETUP AND PROGRAMMING (cont) IV
Setting General Features
When you press the Right button from the General Settings screen, the LCD Display will
automatically display the different features within General Settings. Using the navigation
process, set the features you desire.
Setting Date and Time
Press the OK button. Use the Left/Right buttons to move from one value to the next and the
Up/Down buttons to adjust each value. Press the OK button to lock in selections. When all your
selections have been made, and the date and time has been set, press the Right button to
move to the next option.
DATE & TIME
11/11/11 11:11pm
SETUP MODE
< OPTIONS >
Page 10
WildlifeCam User Guide
PHOTO OR VIDEO?
PHOTO
Setting Photo or Video
Press the OK button. Use the Up/Down buttons to choose between Photo or Video. Press the
OK button. Press Left button to go to the Main Screen.
DETECTION DELAY
10 SECONDS
Event Delay Setting
Detection Delay determines the number of minutes between pictures when an animal is detected
and remains in range. Press the OK button. Use the Up/Down buttons to choose between (5
sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, or 30 min). Press OK to lock in your selection, then
press Left button to go to the next option.
MOTION FREEZE
ON (FAST FLASH)
Setting Motion Freeze
This feature maximizes the image clarity during night photos. When this feature is on, the
camera will adjust the exposure time to reduce blur associated with motion. Other adjustments
are made to increase the brightness and clarity of the photo. When this feature is turned off,
the camera will use a maximum exposure time that will not reduce blur, but will increase the
effective flash range and image brightness of night photos. Press the OK button to confirm the
selection. Press the Right button to move to the next option.
Setting Photo Quality
Press the OK button. Use the Up/Down buttons to choose between 4 image resolution settings.
1. Enhanced: 3264 x 2448
2. High: 2592 x 1944
3. Medium: 1600 x 1200
4. Low: 640 x 480
Press the OK button to confirm the selection. Press the Right button to move to the next option.
PHOTO QUALITY
HIGH (5MP)
MANAGED MEMORY
DO NOT OVERWRITE
Managed Memory
Selecting the OVERWRITE OLDEST option will cause the oldest files to be overwritten with
new captures when the SD card reaches its capacity. With the DO NOT OVERWRITE option
selected, the camera will cease image capture once the SD card reaches capacity. Press the
OK button to select. When your selection has been made, press the Right button to go to
the next option.