H-B Instrument 540 - Manual

Form #0-729
ENGLISH
DESCRIPTION: Digital Stopwatch with 3 Lines Display
FEATURES
Split and Lap Time Measurement
Count Down Timer
Real Time with Year, Month, Day, Hour Minute, and Seconds
Pacer Functions
30 Memories That Can Be Recalled with Fastest Split/Lap Time, Slowest Split/Lap Time, and
Average Split/Lap Time
Water Resistant
Timer Setting Up to 9 Hours, 59 Minutes, 59 Seconds in 1/100 Seconds
Pacer Value is Adjustable from 10 to 320 Seconds
Measure up to 100 Split/Lap Times
Total Elapsed Time, Split Time, and Lap Time Can All Be Displayed and Measured
Simultaneously
SPECIFICATION
Maximum count up range 9 Hours, 59 minutes, 59 seconds
Display resolution 1/100 second
Split Time/Lap Time Range Up to 100 Split/Lap Times
Memories UP to 30 Memories
Pacer Values Adjustable from 10 to 320 counts per minute
Battery Lithium battery CR2032 or equivalent
Display size 31(W) x 24(H) mm
Product size 60(W) x 80(H) x 20(D) mm (not including lanyard)
OPERATION
1. To Set the Time/Calendar: Press [MODE] until you reach time/calendar. To set time/calendar, press
[LAP/SPLIT • RESET] – this will cause the year to flash – to set the year, press [START/STOP] until desired year is
reached, then press [LAP/SPLIT • RESET] to highlight the month. To set the month, press [START/STOP] until
desired month is reached, then press [LAP/SPLIT • RESET] to highlight the day. To set the day, press
[START/STOP] until desired day is reached, then press [LAP/SPLIT • RESET] to choose from 12 or 24-hour
format – press [START/STOP] to change from 12 to 24-hour format. To set the time, press [LAP/SPLIT • RESET]
and the hour will flash. To set the hour, press [START/STOP] until the desired hour is displayed. Press
[LAP/SPLIT • RESET] to move on to the first digit in the minute. Press [START/STOP] until desired first digit is
displayed. Press [LAP/SPLIT • RESET] to move to the second digit in the minute. Press [START/STOP] until desired
second digit is displayed. Press [LAP/SPLIT • RESET] to highlight the seconds. Press [START/STOP] until desired
seconds are displayed. After all changes are made press [MODE].
A. Please note that the date will adjust automatically and will take into consideration February Leap Years.
B. To move the numbers more quickly, press and hold the [START/STOP] button for over 2 seconds.
C. Years are adjustable up to 2049.
2. To Set the Daily Alarm: Press [MODE] until you reach the daily alarm display (AL in top left hand corner). To set
daily alarm press [LAP/SPLIT • RESET] to highlight the hour. Press [START/STOP] to change the hour. Once
desired hour is reached, press [LAP/SPLIT • RESET] to highlight the first digit in the minute. Press [START/STOP]
to change the first digit. Once desired first digit is reached, press
[LAP/SPLIT • RESET] to highlight the second digit in the minute. Press [START/STOP] to change the
second digit. Once desired second digit is reached, press [LAP/SPLIT • RESET]. Press [MODE] to finalize
time. To turn alarm on or off press [RECALL]. ON or “--” will display – ON means that the alarm is
set; “--” means that the alarm will not sound.
A. Please note that when the alarm is on, the alarm sound will last for 15 seconds
B. To move the numbers more quickly, press and hold [START/STOP] for over 2 seconds
3. Stopwatch Mode: Press [MODE] to enter into stopwatch mode. Before using the stopwatch, be sure to reset the
digits to 0:00:00:00. To reset while the stopwatch is stopped, press [LAP/SPLIT • RESET]. To reset while the
stopwatch is counting, first press [START/STOP] to stop counting, and then [LAP/SPLIT • RESET] to reset to zero.
A. “Split Time” refers to an elapsed time required to cover a distance from the start to a given point.
B. “Lap Time” refers to an elapsed time required to cover a given section of the whole distance.
4. Stopwatch Mode: To accumulate elapsed time, press [START/STOP] to begin counting, then press [START/STOP]
to stop counting, and then press [START/STOP] again to continue counting.
5. Stopwatch Mode: For Split Time/Lap Measurement see chart below.