H-B Instrument 696 - Manual (Page 2)

BACKWA
RD
AL
ARM SET
CLICK --------------
CONFIRM
THE
SETTING
ITEM
ONE STEP
FORWARD
ONE STEP
BACKWA
RD
----------- -----------
HOLD ----------- -----------
8STEPS/SEC
OND
FORWARD
8
STEPS/SE
COND
BACKWA
RD
----------- -----------
3. Function Instruction:
3.1 Normal states:
 Hold ‘SET’ to enter into time setting
 Click ‘Alarm’ to switch the alarm on/off
 Hold ‘Alarm’ for more 2 seconds to enter into Alarm setting
 Click ‘UP’ to switch between 12/24Hr
 Click ‘DOWN’ to switch between ℃/℉
 Press ‘Channel’ to switch RF channel, CH1＞CH2＞CH3…
 Hold ‘CH’ key for 2 seconds to clear out all data of current ‘Channel’
 When ALARM rings, click ‘SNOOZE’ to enter into the snooze state every 5 minutes.
3.2 Time Set
 Hold “SET” key for 2 seconds to enter into time setting
 There will have 1Hz flashing during setting
 The sequence of time setting: Zone→ Hour→ Minute→ Year→ Month→ Date→
Language→ Exit
 Click ‘SET’ to confirm the setting
 Press “Up” one time, the setting will go ahead for one step; hold the key for 2 seconds, it
will run forward by 8 steps/second.
 Press “DOWN” one time, the setting will go ahead for one step; hold the key for 2
seconds, it will run forward by 8 steps/second.
 Moon phase is changed according to year, month, and date.
 The system will exit automatically if no key is operated in 8 seconds.
3.3 Alarm Set
 Hold “Alarm” key for 2 second to enter into alarm setting
 There will have 1Hz flashing during setting
 The sequence of alarm setting: Hour  Minute  exit
 Press “Up” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it
will run forward by 8 steps/seconds.
 Press “DOWN” one time, the setting will go ahead for one step; hold the key for 2
seconds, it will run forward by 8 steps/second.
 Press “Alarm” to confirm the setting