Küat TRIO - Manual (Page 3)

BIKE CABLE LOCK
Step 1.
Pull lock housing from end cap to
release cable from magnetic stop.
Step 2.
Slide cable out from lock housing.
Step 3.
Loop cable through rear tire and
rear triangle of bike frame. Insert
cable tip into lock housing to lock.
You do not need the supplied key to
lock but will need the key to unlock
.
1. OPEN LEVER
2. SEAT FORK
4. CLOSE LEVER
3. ADJUST KNOB TO ALLOW LEVER
TO FIRMLY CLAMP FORK
INSERT 15mm
SKEWER TUBE 1.
2. SEAT FORK
AXLE FROM BIKE
4. TIGHTEN AXLE
BIKE FORK MOUNTING-9mm
BIKE FORK MOUNTING-15mm
3. INSERT AXLE
1. INSERT 20mm
SKEWER TUBE
2. SEAT FORK
AXLE FROM BIKE
4. TIGHTEN AXLE
BIKE FORK MOUNTING-20mm
FOR SOME 20mm FORKS WITH
DOUBLE LEVERS, YOU WILL ONLY
BE ABLE TO OPEN LEVER ON
NOTCH SIDE PART WAY. ADJUST
AS NECESSARY.
VISIT WWW.KUATRACKS.COM TO REGISTER YOUR TRIO. CLICK ON REGISTRATION TAB.
VISIT WWW.KUATRACKS.COM FOR VIDEO INSTRUCTION. CLICK ON INSTRUCTIONS TAB.
Fat tire skewer adaters are also available from Küat or your local dealer.
9mm x 135mm FAT BIKE SKEWER
3. INSERT AXLE