Phoenix Audio Spider MT505 SIP Administraor Guide - Manual (Page 18)

This menu items includes the parameters required to set the Spider’s clock. If NTP is selected the time
will be taken from the server, otherwise the clock can be set manually. The NTP parameters include
selecting the primary server (from which the time will be taken), time zone, enabling the Daylight Saving
Time, and the update time interval.
4.2 Management
The management tab includes parameters for the Automatic Update, Manual Update, and
Administration
4.2.1 Automatic Update
Firmware Version: the SIP processor software version
Provisioning Method: can be set to Static (the user specifies the static address of the image file under
the Firmware URL field), DHCP (the unit will get the image file using the DHCP protocol), or disable the
automatic update altogether.
Firmware URL: the user will enter the static address of the image file
Configuration URL: the user defines the static address for the configuration file
Check Period: defined the intervals in which the unit will check for software update
Every day at: defines the time of the day in which the update will occur