Phoenix Audio Octopus - Manual (Page 14)

Phoenix Audio Technologies www.phnxaudio.com 14
Slave
A Slave unit, by definition, is not connected to the room’s
speakers or to the communication channel. Therefore the
only things you set are the inputs. The Input Setup screen is
similar to the Stand Alone units’ setup screen, but it does not
allow you to designate a channel as AUX or SR (these
channels can only be connected to a Master unit).
Please refer to the Stand Alone setting chapter for detailed
explanation on how to set the input levels.
Master
The first screen in setting a Master unit is setting the
speakers’ volume, which is similar to the first screen of a
Stand Alone unit; please refer to the Stand Alone setting
chapter for details.
The next screen is the input setting. A Master unit, by
definition, is not connected to Matrix microphones; therefore
the input selections are limited to Slave, SR, and AUX. See
the details on setting SR and AUX channels in the Stand
Alone chapter.
Once the inputs are set, the program will take you to the
output level setting. This screen is similar to the output setup
screen of the Stand Alone unit – please refer to that chapter
for details.