Vermont Casting Stardance SDFBVRC - Manual (Page 2)

ST125
Firebox washer align
10/15/99 djt
Steel Tab
Side
Support
Shelf
Base
ST125
Fig. 6 Install firebox assembly.
410 Admiral Blvd. • Mississauga, Ontario, Canada L5T 2N6
800-668-5323 • www.cfmcorp.com
CFM Corporation
ST471
Stardance
right assembly
9/28/00
Wingbolt
Wingbolt
ST471
Fig. 4 Attach right side to rear skirt.
Side Rib
Right Side
Steel
Tabs
ST472
stardance
side / back align
9/29/00
Right Side
90°
ST472
Fig. 5 Align both sides with skirt. (Top vent shown)
3. Lift the firebox assembly and slide it into the shell.
The base of the firebox should rest on the side sup-
port shelves. (Fig. 6) The side plates interlock with
the firebox by use of a pair of steel tabs that engage
with the ribs on the base of the firebox. (Fig. 6) Prop-
erly positioned, the firebox will be level and locked in
place. If not, adjust the levelling screw in the foot of
each leg as needed.
Shell Package Front w/Doors Package
Model Firebox Brick Country Granite Sage Brick Country Granite Sage
Blue Cookware Gray Green Blue Cookware Gray Green
Gray Gray
Stardance SDDVT Series SDFBDVT 30120 30122 30123 30124 30150 30152 30153 30154
Stardance SDDVTC Series SDFBVTC 30120 30122 30123 30124 30150 30152 30153 30154
Stardance SDDVR Series SDFBVR 30130 30132 30133 30134 30150 30152 30153 30154
Stardance SDDVRC Series SDFBVRC 30130 30132 30133 30134 30150 30152 30153 30154