Lap/shoulder belt operating instructions – Ram Trucks 2015 ProMaster City - Owner Manual User Manual

Page 39

Advertising
background image

WARNING!

(Continued)

A shoulder belt placed behind you will not protect

you from injury during a collision. You are more
likely to hit your head in a collision if you do not
wear your shoulder belt. The lap and shoulder belt
are meant to be used together.

A frayed or torn seat belt could rip apart in a

collision and leave you with no protection. Inspect
the seat belt system periodically, checking for cuts,
frays, or loose parts. Damaged parts must be re-
placed immediately. Do not disassemble or modify
the seat belt system. Seat belt assemblies must be
replaced after a collision.

Lap/Shoulder Belt Operating Instructions

1. Enter the vehicle and close the door. Sit back and

adjust the seat.

2. The seat belt latch plate is above the back of the front

seat, and next to your arm in the rear seat (for vehicles

equipped with a rear seat). Grasp the latch plate and

pull out the seat belt. Slide the latch plate up the

webbing as far as necessary to allow the seat belt to go

around your lap.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37

Advertising