Assembly instructions – Centro G51208 User Manual
Page 7
10
11
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
11
10
9
a. Attach the left shelf fascia (DB) to the left side shelf
table (DA).
b. Assemble the Side shelf wind shield (DG) to the
left side shelf table (DA), and the left side shelf
fascia (DB), as shown in Figure B and C.
DA
DB
Front
*
A
B
TIP: To position the left side shelf assembly, insert
the two hooks on the side shelf assembly into
the two openings located on the upper left side
panel (BB).
Assemble the left side shelf assembly to the cart
assembly, as shown in fi gure B.
BB
Remove the hardware that is pre-assembled to the
side burner valve bracket(CC), as shown in fi gure
A. Insert the side burner valve stem through the
rear of the left side shelf fascia(DB). Assemble the
side burner valve (cc) to the side shelf fascia (DB),
using the hardware removed.
Assemble the side burner control knob (#12) to
the side burner valve (CC).
Hardware may be included with the hardware
pack.
CC
A
8
7
6
YOU WILL NEED:
6
7
8
X 3
X 3
X 3
YOU WILL NEED:
9
X 5
YOU WILL NEED:
A
A
B
B
B
B
B
2
3
4
4
5
5
X 1
X 1
X 1
X 4
X 4
X 4
YOU WILL NEED:
12
X 1
DG
DB
DA
DA
DG
B
C
DC1
DF1
DG
DB
DA
DB
12
B
CC