Cooper Lighting Bollard Series - Manual (Page 7)

Standard series—design features Standard series—design features
Top
Rugged, cast aluminum. Provides rapid heat dissipation.
Encloses the upper reflector so it is hidden from view.
Tamper-proof screws provide easy access to lamp
compartment.
Housing
Consists of a heavy-duty, seamless extruded aluminum
tube. Lifts off base for easy access to ballast.
Optics
Lower dispersing reflector, in conjunction with a truncated,
octagonal upper collecting reflector, provides low-glare,
highly efficient illumination with optimum uniformity.
EXAMPLE: Using 70W HPS lamps with Bollard Series
luminaires mounted on 20' centers produce a symmetric
light pattern with a max. to min. uniformity ratio of less
that 4:1.
Lens
1/4" wall, impact-resistant clear acrylic. Polycarbonate
lens is optional.
Prismatic refractor
All Bollard Series luminaires are available with an
optional prismatic borosilicate glass refractor to provide
efficient, low-glare light distribution.
Gasketing
Bollards are designed to form a single, integral unit that
is completely gasketed and sealed from outside contami-
nant’s.
Electrical
High Power Factor ballast for –20°F starting. Product is
factory mounted to the base. Quick disconnects provided
between lamp and electrical assembly. HPS and MH
Lamp sources up to 100W MH or HPS and up to 57W
Compact Fluorescent sources available with MOLlength
not exceeding 7".
Finish
Premium fade and abrasion resistant, TGIC Polyester
Powder Coat Finish. Standard colors are Bronze,
Architectural White, Grey and Black. Other architectural
finish colors available including all RALmatches.
Base
Rugged cast aluminum. Completely concealed.
Mounting
Base mounts onto foundation with three (3) 1/2" x 12"
anchor bolts on a 5" Dia. bolt circle (a centrally located 2
7/8" x 3 1/2" wire entrance opening provided). Bollard
housing is secured to the base with flathead, counter-sunk
screws for smooth, uncluttered appearance.
bRc
round standard series
bsc
square standard series