Cowon Systems CW300 - Manual (Page 55)

CW300 CW300
Run isp.exe in the directory you unzipped. Then press the [Start] button.
Wait until the "firmware upgrade successful" message appears on the LCD.
(Normally it takes approximately 35 to 50 seconds to finish upgrading)
When you press "Start" button, "Erase Flash" message appears,
then "Firmware Upgrade" message appears on LCD of iAUDIO.
Never disconnect the USB cable before the "Firmware Upgrade
Successful" message appears.
After removing the USB cable and turning on the power for iAUDIO, check
the firmware version indicated on the lower right. If upgrade is successful,
new firmware version number will be displayed.
55
Appendix B. Upgrading Firmware