Operating instructions, Operation, Perating – Chauvet Vue II User Manual

Page 10: Nstructions, Master/slave mode (master sound, master auto)

Advertising
background image

4.

O

PERATING

I

NSTRUCTIONS

Operation

Stand-Alone Mode (Sound-Active, Auto Mode, Strobe Mode, All On):

This mode allows a single unit to run to the beat of the music, or the unit will auto change in Auto

Mode.

1)

Set dipswitches position to Sound-Active or Auto Mode.

Mode Dipswitches

Sound-Active

1-8: Off, 9: On, 10: Off

Auto Mode

1-4: Effect speed*, 5-7: Off, 8-9: Off, 10: On

Strobe Mode

1-4: Off, 5-7: Strobe speed**, 8-10: Off

All On

1-7: Off, 8: On, 9-10: Off

*Effect

speed

**Strobe

speed

1 on = slow

5-7 off = no strobing

1-2 on = medium

5 on = slow strobing

1-3 on = fast

5-6 on = medium strobing

1-4 on = very fast

5-7 on = fast strobing

2)

The unit will react to the low frequencies of music via the internal microphone in Sound-Active

mode, or the unit will auto change in Auto Mode.

3)

Use the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in

Sound-Active mode. Turning the knob counterclockwise decreases the sensitivity; turning the

knob clockwise increases the sensitivity.

Master/Slave Mode (Master Sound, Master Auto):

This mode will allow you to link up to 32 units together without a controller.

1)

Use standard DMX cables to daisy chain your units together via the DMX connector on the rear

of the units. For longer cable runs we suggest a terminator at the last fixture. For more

information about terminators, see page 8.

2)

Determine which fixture will be the master. Connect a DMX cable from the DMX output

connector of the master to the DMX input connector of another Vue I™ or Vue II™.

3)

Continue connecting the slaves together with DMX cables

4)

Set the dipswitches on the master according to the desired mode of operation.

Mode

Dipswitches

Master Sound

9 = On, 10 = Off

Master Auto

9 = Off, 10 = On

5)

For auto mode, set dipswitches to the desired mode.

Mode Dipswitches

Auto Mode

1-4: Effect speed*, 5-7: Off, 8-9: Off, 10: On

Strobe Mode

1-4: Off, 5-7: Strobe speed**, 8-10: Off

All On

1-7: Off, 8: On, 9-10: Off

*Effect

speed

**Strobe

speed

1 on = slow

5-7 off = no strobing

1-2 on = medium

5 on = slow strobing

1-3 on = fast

5-6 on = medium strobing

1-4 on = very fast

5-7 on = fast strobing

Vue™ II User Manual

10

2007-05-10/13:15

Advertising