Sony HT-DDW660 - Manual (Page 24)

Other Operations
Naming preset stations
and inputs
Youcan enter a name of up to 8 characters for
preset stations and inputs selected with input
buttons, and display it in the receiver’s display.
1
To index a preset station
Press FM or AM to select the FM or AM
band, then tune in the preset station
you want to create an index name for
(page 15).
To index an input
Press the input button to select the
input you want to create an index name
for.
Press MAIN MENU repeatedly to select
^CUSTO^”.
Press< or> repeatedly to select
“NAME IN”.
Press ENTER.
The cursor flashes and you can select a
character.
U s e < o r > and + o r - to create an
index name.
Press + or - repeatedly to select a character,
then press > to move the cursor to the next
position.
Tips
• You can select the character type as follows by
pressing + or- repeatedly.
Alphabet (upper case) —^Numbers —► Symbols
• To enter a blank space, press + or- repeatedly
until a blank space appears in the display.
• If you made a mistake, press < o r > repeatedly
until the character you want to change flashes,
then press + or - repeatedly to select the correct
character.
Press ENTER to store the index name.
Using the Sleep Timer
2
3
4
5
You can set the receiver to turn off automatically
at a specified time. Use the remote for the
operation.
1
Press ALT to light up the button.
2
Press SLEEP while the power is on.
Each time you press SLEEP, the display
changes cyclically as follows:
2-00-00 — 1-30-00 — 1-00-00 —
0-30-00—OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, press ALT to light up the button (page 26), then
press SLEEP. The remaining time appears in the
display. If you press SLEEP again, the sleep timer will
be canceled.
6
24 GB