Sleep to music timer, Dimmer control – Emerson SMARTSET CKS1850C User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SLEEP TO MUSIC TIMER

You can program the sleep timer to play the radio for up to 90 minutes and then

shut off automatically.

1

. ) Press the

SLEEP

button. The display will briefly show

"10”

and the radio will

begin to play. After 10 minutes the radio will shut off automatically. Each time

you press the

SLEEP

button the sleep timer will start at

10

minutes. This is the

sleep timer default setting.

2. ) To increase or decrease the amount of time that the radio will play before

shutting off, hold the

SLEEP

button and press either the

UP

or

DOWN

button

to change the display to the desired sleep time, up to a maximum of 90 minutes

or a minimum of 2 minutes.

Note: When you change the sleep timer from the 10 minute default setting to

a different setting, the new setting becomes the de^ult setting. Whenever you

activate the sleep timer it will begin with your new default setting and count

down to zero from that point.

3. ) To cancel the sleep timer before it counts down to “00” and shut the radio ‘Off’

immediately, press the

SNOOZE

Bar.

IMPORTANT: Remember that the station and volume settings you choose for the

Sleep To Music operation are the same settings you will hear if you set the alarm

for wake to radio the following morning.

DIMMER CONTROL

The

DIMMER

control was set to the

HIGH

position at our factory. If you find the

clock display is too bright in a darkened room, set the

DIMMER

control to the

LOW

position.

15

Advertising