Flex FLE Extended Roof Edge - Manual (Page 5)

FLEXLOCK FLE EXTENDED RADIUS ROOF EDGE
FULLY ADHERED OR MECHANICALLY ATTACHED SINGLE-PLY VERSION
IMPORTANT!!!
MUST INDICATE PROPER RADIUS CONDITION BY
CIRCLING APPROPRIATE OUTSIDE FACE
PROVIDING A RADIUS
THE RADIUS MAY BE PROVIDED
IN ONE OF TWO METHODS:
1.) THE ACTUAL KNOWN RADIUS IS
OUTSIDE
FACE
ROOF LINE
OR
2.) FIELD CONDITION MEASUREMENTS
NOTE: REFER TO ATTACHED WORKSHEET
RADIUS
(PROVIDED BY APPROVER
PER DETAIL A)
MIDPOINT OF
STRAIGHT EDGE
(914 mm)
LENGTH OF
STRAIGHT EDGE
NOTE: CHECK MEASUREMENTS ALONG ENTIRE RADIUS.
DETAIL A
TOP
VIEW
INDICATES AREAS THAT WILL BE SLIT AS
NEEDED TO ACCOMODATE RADIUS
RADIUS FASCIA PROVIDED
IN 12'-0" (3.65 m) LENGTHS CLEAT PROVIDED IN
12'-0"(3.65 m) LENGTHS
FLEXLOCK FLE EXTENDED RADIUS ROOF RDGE DIMENSIONS
PRODUCT ID. NO. H DIM. XDIM.
□ AEF-85
□ AEF-100
□ AEF-115
□ AEF-130
8 1/2" (216 mm)
10" (251 mm)
11 1/2" (292 mm)
13" (330 mm)
7 1/4" (184 mm)
8 3/4" (222 mm)
10 1/4" (260 mm)
11 3/4" (298 mm)
MATE RIAL: Fabrication will proceed only after receipt of
signed print approval.
Print Approval:
Architect and/or contractor shall verify all
dimensions, sizes and quantities. All
products to be installed in strict accordance
with Flex's printed instructions.
Approved by:
Date: _____
.050" (1.27 mm) Aluminum
.063" (1.60 mm) Aluminum
OTHER_______________
Color:
Finish:
QUANTITIES:
Lineal Feet 12'-0" (3.65 m) Lengths
PROJECT:
ARCHITECT:
ROOFING CONTRACTOR:
REPRESENTATIVE/DISTRIBUTOR:
Customer Service:
Phone: 800-969-0108
Fax:610-916-9501
DATE: 12/13/10
DRN BY; JJC
CKD BY: SAK
SHT.# OF
DWG# 28010-3450
c
p: 800-969-0108
f: 610-916-9501
print approval
37