H. storage, I. maintenance accessories – Sears 358.356090-3.7/20" User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H. STORAGE
When your saw is to be stored for over 30 days
always:
1, Drain fuel tank in a safe manner (see Impor
tant Points, page9.)
2. Start Engine and allow to run at an idle
speed until the engine stops.
NOTE: This will remove most of the fuel from
the fuel system.
ICAUTIONT] Wear protective gloves when han
dling the chain. The chain is sharp and can
cut you even when it is not moving.
3.
4.
5.
6
.
7.
8
.
Drain oil, tank.
Remove, clean, and dry the bar and chain.
Store the chain in a container filled with oil
to prevent rust.
Apply a coating of oil to the entire surface of
the bar and wrap it in heavy paper, cloth or
plastic.
Clean the outside surfaces of the engine.
Store the saw in a dry place, out of the reach
of children and away from where fuel vapors
can reach open flames from hot water
heaters, furnaces, etc.
I. MAINTENANCE ACCESSORIES
Available from your nearest Sears Store, Catalog Sales Office, or Service Center, but notfurnished
with your saw.
Key
No.
1
2
Part
No.
Catalog No.
55046
71-36565
—
71-36524
—
71-36526
71-36557
Part
No.
Catalog No.
30073
71-36407
—
71-36711
30114
71-36627
—
-
71-36555
".—
71-36554
■
— ,■
71-36556
44209
71-36370
44246
—
51262
....... 71-36867
51241
71-3639
Description
File Guide
File-5/32" dia:-Twin Pack
File-^2"dia.-Twin Pack
Depth Gauge Tool
Description
Spark Plug-Champion CJ-SY
Replacement Recoil Cord
Carrying Case
2-Cycle Engine Oil
Bar and Chain Lubricant (gallon size)
Bar and Chain Lubricant (quart size)
Lo-Kick® Guide Bar -18"- 358.356100
Lo-Kick® Guide Bar - 20" - 358.356090
Xtra GUARD ® Chain - Oregon® (72SG -70) - 358.356090
(requires 7/32"dia. file)
Power Sharp® Chain - Oregon® (76 TS-66) - 358.356100
(includes Stone Cartridge Assy.)
24