Sears 358.356090-3.7/20" - Manual (Page 5)

KNOW YOUR CHAIN SAW
A. INTRODUCTION
The infonnation found in this manual will help
you properly prepare your chain saw for use,
understand how to operate your saw safely, and
perform maintenance required to keep your unit
in good working condition.
Your saw has been.designed with safety in mind
and Includes the following safety features as
standard equipment:
Spark Arrestor
—-Handguards------.... ^....................................... ..................
Counter-Vibe® Vibration System
Lo-KIck® Guide Bar
..........
Guard Link Chain
The chain saw should never be operated unless
these devices are properly installed on the unit.
The Lo-Kick« Guide Bar and Guard Link Chain have
been designed to reduce the hazard of kickback. You
should thoroughly read and understand the section,
“Controlling Kickback" on page 11.
STATE AND LOCAL ORDINANCE
REOUIREMENTS
Your saw is equipped with a temperature
limiting muffler and spark arresting screen
which meets the requirements of California
Codes 4442 and 4443. Ail U.S. forest land and the
states of California, Maine, Washington and
Oregon
require many internal combustion
engines to be equipped with a spark arrestor
screen and a temperature limiting muffler by
law. ‘
If you operate a chain saw in a state or locale
.where such regulations exist, you are legally re-.
sponsible for maintaining the operating condi­
tion of these parts. Failure to do so could subject
you to liability or to a fihé.
Muffler and spark arres­
tor maintenance is found on page 19.
CARTON CONTENTS
After you unpack the carton:
1. Check the contents against the list below.
2. Examine the items for damage,
3.
Notify your Sears Store Immediately if a part
is missing or damaged,
--
KEY NO. CARTON CONTENTS: QTY.
1 Power Head 1
2 Guide Bar 1
3 8 oz. can, 2-Cycle Engine Oil 1
— Loose Parts Bag (not shown) 1
LOOSE PARTS BAG CONTENTS:
—^ Operator’s Manual (not shown) i
4 Handguard i
5 Cap-Handguard i
6 Screws-Handguard 3
7 Spur 1
8 Screw-Spur 2
9 Chain 1
10 Scrench 1