Important safety instructions, Warning – Sears 200.71201 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Important Safety Instructions

- SAVE THESE INSTRUCTIONS -

A

warning

To reduce the risk of explosion, explosive gases, or injury while

using your battery charger, follow the precautions listed beiow:

'Read

all

instructions and cautions printed on the

battery charger, battery, and vehicle or equipment
using battery.

' Use charger only on

lead-acid

type rechargeable

batteries, such as those used in cars, trucks, trac­

tors, airplanes, vans, RV’s, trolling motors, etc.
This charger is not intended to supply power to
a low voltage electrical system other than in an
automotive application.

■ Use only

attachments recommended or sold by

manufacturer. The use of attachments not recom­
mended by the manufacturer may result in fire,

electric shock, or injury.

•Do not

disassemble charger. Take it to a quaiified

service professional if service or repair is required.
Incorrect assembly may result in fire or electrical
shock,

‘To reduce risk of electrical shock,

unplug

the

charger from the outlet before attempting any

maintenance or cleaning.

•Always charge battery in a well ventilated area.

Help us help you

Remember:

• Place

charger as far away from battery being

charged as the charger cables will permit.

• Do not

expose charger to rain or snow.

• Never

charge a frozen battery. If battery fluid (electro­

lyte) becomes frozen, bring battery into a warm area

to thaw before you begin charging.

• Never

allow battery acid to drip on charger when

reading specific gravity or filling battery.

• Never

set a battery on top of the charger.

• Never

place charger directly above battery being

charged. The gases from the battery will corrode
and damage the charger.

• Never

use charger for charging dry-cell batteries that

are commonly used with home appliances. These
batteries may burst and cause personal injury.

• Never

touch the battery clamps together when the

charger is energized.

• Never

operate charger if it has received a hard blow,

been dropped, or otherwise damaged. Take it to a
qualified professional for inspection and repair.

• Be sure

to position the charger power cord to

prevent it from being stepped on, tripped over, or

damaged.

• Never

pull out the plug by the cord when unplug­

ging the charger. Pulling on the cord may cause
damage to the cord or the plug.

• Do not

operate the charger if it has a damaged

power cord or plug. Have the cord replaced.

Personal Safety Precautions

For your own persona! safety, please follow the follow­
ing precautions:

• Wear complete eye and clothing protection

when

working with lead-acid batteries.

• Be sure

that someone is within range of your voice

to come to your aid if needed while you work with or

are near a lead-acid battery.

• Have plenty of fresh water and soap

nearby for use

in case battery acid contacts your eyes, skin, or cloth­
ing. If this happens, wash immediately with soap and

water. Then get medical attention.

■ Avoid touching your eyes

while working with a

battery. Acid particles (corrosion) may get into your
eyes. If this occurs, flush eyes immediately with
running cold water for at least ten minutes. Then

immediately get medical attention.

' Remove all personal metal Items

from your body,

such as rings, bracelets, necklaces, and watches
while working with a lead-acid battery. A battery can

produce a short circuit current high enough to weld
a ring (or the like) to metal, causing a severe burn.

> Take care

not to drop any metal tool or metal object

onto the battery. This may spark or short circuit the

battery or another electrical device that may cause

an explosion.

• Always

operate your battery charger in an open, well

ventilated area.

• Never

smoke or allow a spark or flame in the vicinity

of the battery or engine. Batteries generate explosive
gases.

• Neutralize

any acid spills thoroughly with baking

soda before attempting to clean up.

Advertising