Using the washer, Prepare and sort laundry as, Add wash load to tub – Sears 95701 User Manual

Page 9: Choose control settings, Water tcmpeirature, Water level, Turn on hot and cold water faucets, Cycle selections, Use washer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Use

Washer

Remember—Select Water Temperature

and Water Level for each load

WASH TEMPERATUREE

COLD

WATER LEVEL

MEDIUM

SOAK/

PREWASH

PREWASH

HEAVY

OFF SOIL MEDIUW

LIGHT

COTTON

STURDY

■WARM

KNITS/

SOIL ^

PERM

DELICATE

PRESS

SPIN ONLY PULL-START PUSH ■ STOP ^ RINSE S SPIN

USING THE WASHER

1. Prepare and sort laundry as

directed on page 4.

2.

Measure correct amount of

laundry aids and add to empty
tub.
(Refer to pages 6 and 7 for
laundry products and water
hardness information.)

3. If desired, add diluted liquid

bleach as directed in Bleach Dis­
penser section on page 5. Do not
pxjur bleach directly onto wash

load.

4. Add wash load to tub.
5. Choose control settings

according to type of load and
amount of soil.

• WATER TCMPEIRATURE

Select

desired

wash/rinse

temperature cdmbination. The
washer will not fill if the knob

is pointing between 2 settings.
See page 10 for suggested
settings.

• WATER LEVEL

Select water level that is best
for size of toad washed. Water
should cover top of wash load.

6. Push cycle selector knob in

and turn right (clockwise) to
desired wash cycle and time.
For best results, follow fabric
care

labels

for

washing

instructions.

7. Turn on hot and cold water

faucets.

8. Start washer by closing lid and

pulling out timer knob. Washer
will operate with the lid open.
However, it will not go into spin
cycle unless lid is closed. To

stop washer or change cycle,
push in Cycle Selector knob and
turn it clockwise to desired
setting.

9. Add fabric softener, if desired,

to final rinse. Follow manufac­
turer’s directions on product label.

(If a fabric softener dispenser is
available, follow directions on
page 5.)

10. After the last spin cycle, wait

approximately 1 to 2 minutes for
the safety lid lock to release.
Remove wash load for drying.

CYCLE SELECTIONS

COTTON

STURDY

This

cycle

provides up to 15 minutes of normal
agitation, a spray rinse in the first

spin followed by a deep rinse and 10
minutes of fast spin. Set selector
according to amount of soil in each
load.

PERM PRESS

This cycle pro­

vides up to 12 minutes of normal
agitation followed by a 2 minute

cool down rinse to reduce wrinkling
in the first spin, a deep rinse and 6
minutes of fast spin.

KNITS/DELICATE

This

cycle

provides

6

minutes

of

gentle

agitation followed by a spray rinse
in the first spin, a deep rinse and 6
minutes of slow spin.

SOAK

This cycle can be used to

treat heavily soihxl or stained items
that may requii e more than one wash.
It provides 2 minutes of normal

agitation followed by 12 minutes of
soak, 2 minutes of normal agitation
and 6 minutes of fast spin. Use
recommended amounts of detergent
and bleach or soaking agent for one
wash cycle. (See package labels for
amounts.) Cold water is used in this
cycle.

NOTE:

Tlie Soak cycle should

always be followed by a wash cycle
using

recommended

amount

of

detergent.

PREWASH

The Prewash portion

of the Soak cycle can be used alone to
help remove protein-based stains such
as milk, grass and blood or to loosen

soils

before

washing.

Prev/ash

provides 2 minutes of normal agitation
followed by 6 minutes of fast spin.
Use

recommended

^mount

of

detergent for one wash cycle, ^ater
temperature will

be

the same as wash

water temperature selected.

A

caution

Using hot water in

Prewash can set stains. See Stain
Removal chart on page 7.

Page 9

Advertising
This manual is related to the following products: