Sears 625.3444 - Manual (Page 5)

CARE AND CLEANING OF YOUR WATER PURIFIER
continued from page 4
carbon bags when you begin to get unwanted odor.
The filters will last 2-3 months if the Purifier is used
every day. They will last longer if you don’t make
purified water that often. Get new carbon bags from
Sears, Stock No. 42-34541.
TO REPLACE
...Remove the cover from the tank.
...Remove the carbon filler housing (push IN and pull
DOWN) from the cover spout.
...Remove the used carbon bags and throw away.
Rinse the inside of the housing with water.
...Push new carbon bags down into the housing as far
as they will go (see step 7 on page 3).
...Replace the housing onto the cover spout, and
replace the cover on the tank.
The next time you make purified water, discard the
first 2 or 3 cupfuls which may have small, harmless,
carbon fines in it.
NOTE: The physiological effects of the operation of this appliance, beneficial or
otherwise, have not been investigated by Underwriters Laboratories. See Product Data
Sheet for test data obtained from an independent iaboratory.
NOT MAKING ANY
PURIFIED WATER
PROBLEM CHECK LIST
NOT MAKING ENOUGH
PURIFIED WATER
EACH BATCH
STEAM COMING
FROM SPOUT
WATER LEAKS
FROM SPOUT
1. Purifier power cord
not plugged into
electrical outlet.
2. No power to electrical
outlet.
3. Cover cord not
plugged into Purifier
base receptacle.
4. Did not press reset
button to start cycle.
5. Did not fill the tank
with tap water.
1. Cover cord not
plugged into Purifier
base receptacle.
2. Did not fill tank with
water to max. fill line.
3. Purifier cover gasket
not sealing tightly on
tank (be sure gasket
is down, all the way
around, against
bottom lip on cover -
see Key No. 4,
page 6).
4. Storage bottle not
placed directly under
spout.
1. Cover cord not
plugged into Purifier
base receptacle.
1. Carbon bags not
pushed fully down Into
spout.
2. Spout not properly
fastened to cover.