Do’s and don’ts for a better wash – Sears KENMORE 91601 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Prevent ¡njyfy

[A

war

NIN

g

I

The

Laundry

Center

must

be

installed

and

electrically

grounded in accordance with local codes

by a qualified service person to prevent
electric shock hazard and assure stability
during operation Installation instruc­
tions are packed on top of washer for in­
staller’s reference. Refer to INSIALLA-

LION INSTRUCTIONS for detailed

grounding

procedures

If

Laundry

Center is moved to a new location, have
unit checked and reinstalled by a quali­
fied service person

[AWARNIN^ T

o

prevent personal in­

jury or damage to Laundiy Center, the
electrical cord of a gas dryer must be
plugged into a properly grounded and
polarized 3-prong outlet The third
grounding

prong

must

never

be

removed, Never ground dryer to a gas
pipe Do not use an extension cord

[AWARNi№Gl Follow package direc­
tions when using laundry products. In­
correct usage can produce poisonous
gas—resulting in serious injury or death,

♦ Do not combine laundry products for

use in one load unless specified on
label.

• DO NOT mix chlorine bleach with

ammonia or acids such as vinegar

(AWARNINGI

T

o

prevent personal in­

jury and damage to washer

or

dryer;

• Do not repair or replace any part of

unit or attempt any servicing unless
specifically

recommended

in

this

Owner’s Guide Use only authorized
parts,.

• Do not tamper with controls,
• Do not install or store this washer

where it will be exposed to weather,

[AWR^

always

disconnect

Laundry Center from electrical supply
before attempting any service or clean­
ing, Failure to do so can result in electri­
cal shock

Or

injury,

lAWARNNGi T

0

prevent injury, never

reach into the washer while parts are
moving. Before loading, unloading or
adding items, push in Cycle Selector.
Allow tub to coast to a complete stop
before reaching inside

DO’S AND DON’TS For a Better Wash

DO

DO

DO

DO

DO

DO

,DO

DO NOT

DO NOT

read and follow manutaciurer's care label

sort wash load by color, fabric and construction, amount of soil
and iinting

add measured amount of detergent or soap to empty washer.

Follow recommendations on detergent (soap) package for size
load, soil and water conditions In hard water areas slightly

more detergent may be required for satisfactory results

dissolve powdered detergent in warm water before adding to a
cold wash

choose correct water level for size of wash load

select wash cycle designed for load to be washed

read additional information in this guide to make your launder­
ing experience a satisfactory one,

put fabric softener in same water as soap, detergent or other
laundry aids. Oil-like spots on articles may result

overload washer Articles must have room to move and turn
freely

iAWARNINGj To prevent injury, do not
reach into dryer if drum is moving. Wait
until machine has stopped completely
before reaching into drum.

Failure to comply with these warn­

ings could result in serious personal in­

juries.

Safety Features

THERMAL-LIMITER SWITCH auto­

matically shuts down dryer motor in the
unlikely event of an over-heated situa­
tion (electric dryer models only)

MOTOR SAFETY SWITCH shuts off
heat in dryer if motor stops

SAVE THESE INSTRUCTIONS

i

AWARNING T

o

prevent possible fire

hazard, do not put anything on top of

Laundry Center,

Page 3

Advertising