Energy-saving tips, Care and cleaning, Outside – Sears 71579 User Manual

Page 11: Inside, Behind refrigerator

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Energy-Saving Tips

® Don't open the doors more often than necessary,

® Close the doors as soon as possible, particularly in
hot, humid weather.

® Keep the Power AAiser Switch in the left position
unless moisture forms on the cabinet in hot, humid
weather,

® Be sure the doors are closed tightly. Before leaving

the house or retiring for the night, check to be sure
the doors haven't been left open accidentally,

® Store only those foods requiring refrigeration in

your refrigerator.

® Wipe moisture from bottles and cartons before
putting them in the refrigerator.

® Keep foods covered to reduce moisture buildup
inside the refrigerator.

® If you turn the controls to the coldest position for
quick chilling or freezing, be sure to turn them back

to regular settings.

® Don't overcrowd your refrigerator. Overcrowding
can require extra electrical energy to keep
everything cool.

Care and Cleaning

Outside

The ice dispenser spill shelf should be wiped dry

immediately to prevent spotting. Water left on the

shelf may leave deposits that you can remove by
soaking in undiluted vinegar. You can also use

a

paste of non-precipitating water softener (such as

Calgon brand) and water, or one teaspoon of citric

acid powder per pint of hot tap water. Soak until the

deposit disappears or becomes loose enough to rinse

away. Usually 30 minutes soaking time is adequate.

Avoid using wax on the spill shelf and trim.

The door handles and trim can be cleaned with

a

cloth dampened with a solution of mild liquid

dishwashing detergent and water. Dry with a soft
cloth. Don't wax handles or trim.

Keep the finish clean. Wipe with a clean cloth

lightly dampened with kitchen appliance wax or

mild liquid dishwashing detergent. Dry and polish
with a clean, soft cloth. Do not wipe the refrigerator
with a soiled dishwashing cloth or wet towel. They

may leave a residue that can harm the paint. Do not
use scouring pads, powdered cleaners, bleach or
cleaners containing bleach because these products
can scratch and weaken the paint finish.

Protect the paint finish. The outside of the
refrigerator has a high quality, baked-on paint finish.

With proper care, it will stay new-looking and rust-free
for years. Apply a coat of kitchen appliance wax when

the refrigerator is new and then at least twice a year.

Inside

Clean the inside of the fresh food and freezer
compartments at least once a year. Unplug the
refrigerator before cleaning. If this is not practical,
wring excess moisture out of sponge or cloth when
cleaning around switches, lights or controls.

Use warm water and baking soda solution—about
a tablespoon of baking soda to

a

quart of water. This

both cleans and neutralizes odors. Rinse thoroughly
with water and wipe dry.

Other parts of the refrigerator—including door
gaskets, vegetable drawers and all plastic parts—
can be cleaned the same way Do not use cleansing
powders or other abrasive cleaners.

To help prevent odors, leave on open box of baking

soda in the rear of the refrigerator, on the top shelf.

Change the box every three months. An open box of

baking soda in the freezer will absorb stale odors.

Bo not wash any plastic ports from your
refrigerator In your automatic dishwasher.

Condenser

The condenser is located behind the base grille.

For most efficient operation, you need to keep the
condenser clean. Turn temperature control to OFF.
Remove the base grille
(see page 3). Sweep
away or vacuum dust
that is readily accessible
on condenser coils, then
turn the control back on.
For best results, use a
brush specially designed
for this purpose, it is
available at your Sears store or service center. This
easy cleaning operation should be done at least
once a year.

Behind Refrigerator

Care should be taken in moving your refrigerator

away from the wall. All types of floor coverings con
be damaged, particularly cushioned coverings and

those with embossed surfaces. Pull the refrigerator

straight out and return it to position by pushing it
straight in. Moving your refrigerator in a side
direction may result in damage to your floor
covering or refrigerator.

12

Advertising
This manual is related to the following products: