Snmp configuration, Snmp configuration screen, Send authentication traps – Cabletron Systems STS16-20R User Manual
Page 216: Enable rmon statistics
202
SmartStack STS16-20D/STS16-20R Token Ring Switches Installation and User Guide
Monitoring the Network with SNMP
SNMP Configuration
Use the SNMP Configuration screen and all of its submenus to configure specific
attributes related to SNMP.
SNMP Configuration Screen
To open this screen from the main menu, select Configuration
→
→
→
→
SNMP
Configuration.
Send Authentication Traps
Indicates whether SNMP should issue an authentication trap to trap receivers
whenever an unauthorized request is detected, that is, a read- or write-attempt with
the wrong community name.
Default: Yes
Enable RMON Statistics
Enables the gathering of a subset of the RMON statistics from the RMON MIBs.
The default setting is No. The following groups are supported:
•
Token-Ring Statistics (MAC and Promiscuous)
•
History
•
Event
•
Alarm
See detailed description of RMON Support on page 37.