Using advanced features, Setting your tv for antenna or cable – Sears 274.4372859 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Advanced Features
Setting Your TV for Antenna or Cable
Your TV automatically adjusts this feature when the TV places channels
in memory (Autoprogram). Follow the steps below to change the setting
as needed.
1. Select the Setup menu
13
Controls Alarm Adjust Setuo
Autooroaram
Label: 13
Clear
Channel Memory; 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Press MENU»PROG repeatedly to
select the Setup menu. This menu
is white.
2. Highlight Cable/Air
13
Controls Alarm Adjust
Setup
Autoprogram
Label. 13
Clear
I Channel Memory: 13 Stored 1
Cable/Air: Cable i,
|_VCR 1 Channel: 00
Press MOVE V to highlight
Cable/Air.
3. Select Cable or Air
13
Controls Alarm Adjust Setup
Autoprogram
Label: 13
Clear
Channel Memory: 13 Stored
Press MOVE or ► to select
Cable or Air. Select Cable if you
have cable. Select Air if you have a
home antenna connected to
your TV.
24